xTool Laser Test Pack
Unmissable Deal: 50% OFF!
- ⭐⭐⭐⭐⭐ (283)
- Engineered for Perfect Cuts & Engravings - Unlock cleaner cuts, sharper engraving, and higher accuracy with a complete power × speed calibration matrix designed specifically for xTool machines.
- Built for xTool Studio – Ready-to-use .xcs files for xTool models: S1, P2S, P2, P1, M1 Ultra, M1, F2, F1 Ultra, F1, D1 Pro 2, D1 Pro and D1 — including Diode, CO₂ and Infrared laser configurations.
- 19 Dedicated .xcs Files – One file per machine and power variant. Open it, place your material, press Process — all parameters are already set, no manual configuration needed.
- 25+ Page Step-by-Step Manual – From machine setup to reading your results: everything you need to dial in the perfect settings for any material, with confidence.
- Save Time, Material & Money – Stop guessing. Identify the best settings with a single visual test
- +1 FREE BONUS ⮕ HONEYMOON Planner
ONE-TIME Payment!
NO Subscription
Instant Download
ALL-IN-ONE All files, neatly organized
25+ pages step-by-step GUIDE
Is This for You?
The xTool Laser Test Pack is designed to work directly with xTool Studio, the updated and free version of xTool Creative Space (XCS).
It includes 19 dedicated .xcs files, each prepared for the currently covered xTool models, including D1, D1 Pro, D1 Pro 2, F1, F1 Ultra, F2, M1, M1 Ultra, P1, P2, P2S and S1.
Several files are also adapted for specific power versions and laser modules, including 10W, 20W, 40W, CO₂ and IR configurations, so you can open the file that matches your machine and run a calibrated material test directly inside xTool Studio.
Don’t forget: better results start with the right laser settings!
Test your material first, dial in the ideal power and speed,
and get cleaner cuts and sharper engravings with your xTool laser.
Test Any Material
From wood and acrylic to leather, cork, cardboard, MDF and other laser-safe materials, the xTool Laser Test Pack helps you find the right settings for each surface you work with. Run the test on your material and get a clear visual reference of how different power and speed combinations perform for both cutting and engraving.
You can instantly see which settings cut cleanly, which ones create the best engraving contrast, and which combinations are too weak or too aggressive. Once completed, each test card becomes a practical reference you can keep and reuse whenever you work with that same material again.
Step-by-step guidance included
This product includes a complete PDF instruction manual with more than 25 pages, designed to guide users through the entire calibration process from start to finish.
The manual explains how to open the correct file for each xTool machine, how to run the material test in xTool Studio, how to avoid common setup mistakes, and how to read the final cut and engraving results.
It also covers safety, machine setup, IR modules, troubleshooting, maintenance tips, and useful reference values for common materials.
The Past
vs.
The Future
The Past vs. The Future
❌ Old Workflow
- Guessing power and speed settings every time you test a new material
- Manually creating test grids or adapting files that were not made for xTool Studio
- Risking inconsistent results by using generic settings found online
✅ With xTool Laser Test Pack
- Dedicated .xcs files for xTool Studio — open the file made for your specific xTool model
- Clear cut and engrave test matrix — compare power and speed combinations at a glance
- Faster, more reliable material setup — create a reusable reference card for wood, acrylic, leather, MDF, cork, cardboard and more
Other useful tools
Dial in your xTool laser with confidence
XTOOL STUDIO READY
Open the dedicated .xcs file for your machine and run the material test directly inside xTool Studio, without rebuilding the grid manually.
MADE FOR CURRENT XTOOL MODELS
Includes test files for the main xTool machines, including D1, D1 Pro, D1 Pro 2, F1, F1 Ultra, F2, M1, M1 Ultra, P1, P2, P2S and S1, with variants for different power levels and IR modules.
STEP-BY-STEP GUIDANCE INCLUDED
The included PDF manual explains how to choose the right file, run the test correctly, avoid common mistakes, and read the cut and engrave results.
RELIABLE SETTINGS FOR EVERY MATERIAL
Create a practical reference card for each material you test, so you can quickly identify clean cutting settings, engraving contrast, and combinations to avoid.
Who am I?
Hey! I’m Paul, the maker behind Laser Cut Empire, a space born from countless hours spent designing, cutting, testing, and refining every single file.
What started as a personal passion for woodcraft and precision design has grown into a full collection built to inspire others who share the same love for creation. I know the satisfaction of seeing a piece take shape exactly as you imagined it — the sound of the laser, the scent of the wood, the pride in holding something you made from scratch.
That’s why every file in this bundle is created with care, so you can enjoy the creative process as much as the final result.
Here, it’s not just about cutting wood — it’s about shaping ideas into reality.
Questions?
Have a look here
xTool Laser Test Pack
Unmissable Deal: 50% OFF!
- ⭐⭐⭐⭐⭐ (283)
- Engineered for Perfect Cuts & Engravings - Unlock cleaner cuts, sharper engraving, and higher accuracy with a complete power × speed calibration matrix designed specifically for xTool machines.
- Built for xTool Studio – Ready-to-use .xcs files for xTool models: S1, P2S, P2, P1, M1 Ultra, M1, F2, F1 Ultra, F1, D1 Pro 2, D1 Pro and D1 — including Diode, CO₂ and Infrared laser configurations.
- 19 Dedicated .xcs Files – One file per machine and power variant. Open it, place your material, press Process — all parameters are already set, no manual configuration needed.
- 25+ Page Step-by-Step Manual – From machine setup to reading your results: everything you need to dial in the perfect settings for any material, with confidence.
- Save Time, Material & Money – Stop guessing. Identify the best settings with a single visual test
- +1 FREE BONUS ⮕ HONEYMOON Planner